Φ35mm One Way Clip On Soft Close Hinge | Maxave

95 Soft Close Hinges 1 1

95 Soft Close Hinges 2

95 Soft Close Hinges 3

95 Soft Close Hinges 4

95 Soft Close Hinges 1 1

95 Soft Close Hinges 2

95 Soft Close Hinges 3

95 Soft Close Hinges 4

Φ35mm One Way Clip On Soft Close Hinge

Qualitätsklassifizierung nach EN 15570, Stufe 3
Für Türstärken von 15 - 24 mm
Becher Tiefe 12,8 mm
Integrierte Belagverstellung 2 mm / -2 mm
Integrierte Tiefenverstellung 3 mm / -2 mm
Höhenverstellung an der Montageplatte
Stahl, vernickelt

Material: Stahl
Finish: Nickel plated/Black nickel
Cup diameter: Φ35mm
Opening angle: 95°
Door thickness: 15-22mm
Qualitätsstufe: Entspricht den BS EN15570, ANSI /BIFMA X5.5, ANSI / BHMA A156.9, ANSI KCMA A161.1
Product feature: Large door cover, Smooth for open and close, Collision proof, Easy to disassemble

Angebot für dieses Produkt anfordern

Testbericht abrufen

ARM INSTALLATION/ADJUSTMENT

Full Overlay		Half Overlay		Inset
Arm installation/Adjustment	Item No.	Arm installation/Adjustment	Item No.	Arm installation/Adjustment	Item No.
Slide on	MW029XX	Slide on	MW029XX	Slide on	MW029XX
Clip on	MW029XX	Clip on	MW029XX	Clip on	MW029XX
Clip on with cam adjust	MW029XX	Clip on with cam adjust	MW029XX	Clip on with cam adjust	MW029XX
Fixed plate	MW029XX	Fixed plate	MW029XX	Fixed plate	MW029XX

BOHRUNG FÜR BECHER

cup 1

cup 2

cup 3

TOPFEINSATZ

		Screw on
		Wood screws	S
		Euro screws	L07
		Expanding
		Ø 8mm expansive dowel	E08
		Ø 10mm expansive dowel	E10
		Knock-in
		Ø 8mm dowel	D08
		Ø 10mm dowel	D10

OVERLAY-TABELLE

over lay table

MINIMUM REVEAL TABLE

revealtm

SCHARNIEREINSTELLUNG

	Depth Adjustment
	Rotate depth screw to adjust door gap. Adjust range : 3.5mm
	Overlay Adjustment
	Rotate lateral screw to increase or decrease door overlay. Adjust range : 5mm
	Height Adjustment
	Rotate lateral screw to increase or decrease door overlay. Adjust range : 3.5mm
Notice: The reference adjustment range is the product design range, the actual size of the cabinet and the drilling method may have a certain impact on the parameters.