Φ26mm One Way Clip On Soft Close Hinge | Maxave

Quick Apply Soft Close Hinges 1 1

Quick Apply Soft Close Hinges 2

Quick Apply Soft Close Hinges 3

Quick Apply Soft Close Hinges 4

Quick Apply Soft Close Hinges 1 1

Quick Apply Soft Close Hinges 2

Quick Apply Soft Close Hinges 3

Quick Apply Soft Close Hinges 4

Φ26mm One Way Clip On Soft Close Hinge

Kwaliteitsclassificatie volgens EN 15570, niveau 3
Voor deurdikte 15 - 24 mm
Cup diepte 12,8 mm
Geïntegreerde overlay aanpassing 2 mm / -2 mm
Geïntegreerde diepte-instelling 3 mm / -2 mm
Hoogteverstelling bij montageplaat
Staal, vernikkeld

Materiaal: Staal
Finish: Nickel plated/Black nickel
Cup diameter: Φ26mm
Opening angle: 95°
Door thickness: 14-19mm
Kwaliteitsklasse: Voldoen aan BS EN15570, ANSI / BIFMA X5.5, ANSI / BHMA A156.9, ANSI / KCMA A161.1
Product feature: Large door cover, Smooth for open and close, Collision proof, Easy to disassemble

Offerte aanvragen voor dit product

Testrapport aanvragen

ARM INSTALLATION/ADJUSTMENT

Full Overlay		Half Overlay		Inset
Arm installation/Adjustment	Item No.	Arm installation/Adjustment	Item No.	Arm installation/Adjustment	Item No.
Slide on	MW029XX	Slide on	MW029XX	Slide on	MW029XX
Clip on	MW029XX	Clip on	MW029XX	Clip on	MW029XX
Clip on with cam adjust	MW029XX	Clip on with cam adjust	MW029XX	Clip on with cam adjust	MW029XX
Fixed plate	MW029XX	Fixed plate	MW029XX	Fixed plate	MW029XX

BOREN VOOR BEKER

cup 1

cup 2

cup 3

BEKERINSTALLATIE

		Screw on
		Wood screws	S
		Euro screws	L07
		Expanding
		Ø 8mm expansive dowel	E08
		Ø 10mm expansive dowel	E10
		Knock-in
		Ø 8mm dowel	D08
		Ø 10mm dowel	D10

OVERLAY TABEL

overlay table3

MINIMUM REVEAL TABLE

MINIMUM REVEAL TABLE3

SCHARNIERAFSTELLING

	Depth Adjustment
	Rotate depth screw to adjust door gap. Adjust range : 4.8mm(cam screw)5mm(depth screw)
	Overlay Adjustment
	Rotate lateral screw to increase or decrease door overlay. Adjust range : 6mm
	Height Adjustment
	Linear mounting plate height adjust range 4mm
Notice: The reference adjustment range is the product design range, the actual size of the cabinet and the drilling method may have a certain impact on the parameters.