Φ35mm Aluminum Fixed Mounted Door Soft Close Hinge | Maxave

Fixed Soft Close Hinges 1 1

Fixed Soft Close Hinges 2

Fixed Soft Close Hinges 3

Fixed Soft Close Hinges 4

Fixed Soft Close Hinges 1 1

Fixed Soft Close Hinges 2

Fixed Soft Close Hinges 3

Fixed Soft Close Hinges 4

Φ35mm Aluminum Fixed Mounted Door Soft Close Hinge

EN 15570 kapsamında kalite sınıflandırması, Seviye 3
Kapı kalınlığı 15 - 24 mm için
Bardak derinliği 12,8 mm
Entegre kaplama ayarı 2 mm / -2 mm
Entegre derinlik ayarı 3 mm / -2 mm
Montaj plakasında yükseklik ayarı
Çelik, nikel kaplama

Malzeme Çelik
Finish: Nickel plated/Black nickel
Opening angle: 165°
Door thickness: 14-26mm
Kalite derecesi: İle uyumlu BS EN15570, ANSI / BIFMA X5.5, ANSI / BHMA A156.9, ANSI / KCMA A161.1
Product feature: Smooth for open and close, Collision proof, Easy to disassemble, Wide angle Opening

Bu Ürün İçin Fiyat Teklifi Alın

Test Raporu Alın

ARM INSTALLATION/ADJUSTMENT

Full Overlay		Half Overlay		Inset
Arm installation/Adjustment	Item No.	Arm installation/Adjustment	Item No.	Arm installation/Adjustment	Item No.
Clip on with cam(zinc)	W093	Clip on with cam(zinc)	W083	Clip on with cam(zinc)	W073
Clip on with cam(steel)	W093S	Clip on with cam(steel)	W083S	Clip on with cam(steel)	W073S

FINCAN IÇIN DELME

DRILLING FOR CUP4

BARDAK KURULUMU

FINCAN KURULUMU3

OVERLAY TABLOSU

OVERLAY TABLE4

MINIMUM REVEAL TABLE

MINIMUM REVEAL TABLE4

MENTEŞE AYARI

	Depth Adjustment
	Rotate depth screw to adjust door gap. Adjust range : 3.8mm
	Overlay Adjustment
	Rotate lateral screw to increase or decrease door overlay. Adjust range : 6mm
	Height Adjustment
	Adjust the mounting plate on the panel to adjust the door’s height.
Notice: The reference adjustment range is the product design range, the actual size of the cabinet and the drilling method may have a certain impact on the parameters.