Φ26mm One Way Clip On Soft Close Hinge | Maxave

Quick Apply Soft Close Hinges 1 1

Quick Apply Soft Close Hinges 2

Quick Apply Soft Close Hinges 3

Quick Apply Soft Close Hinges 4

Quick Apply Soft Close Hinges 1 1

Quick Apply Soft Close Hinges 2

Quick Apply Soft Close Hinges 3

Quick Apply Soft Close Hinges 4

Φ26mm One Way Clip On Soft Close Hinge

EN 15570 kapsamında kalite sınıflandırması, Seviye 3
Kapı kalınlığı 15 - 24 mm için
Bardak derinliği 12,8 mm
Entegre kaplama ayarı 2 mm / -2 mm
Entegre derinlik ayarı 3 mm / -2 mm
Montaj plakasında yükseklik ayarı
Çelik, nikel kaplama

Malzeme Çelik
Finish: Nickel plated/Black nickel
Cup diameter: Φ26mm
Opening angle: 95°
Door thickness: 14-19mm
Kalite derecesi: İle uyumlu BS EN15570, ANSI / BIFMA X5.5, ANSI / BHMA A156.9, ANSI / KCMA A161.1
Product feature: Large door cover, Smooth for open and close, Collision proof, Easy to disassemble

Bu Ürün İçin Fiyat Teklifi Alın

Test Raporu Alın

ARM INSTALLATION/ADJUSTMENT

Full Overlay		Half Overlay		Inset
Arm installation/Adjustment	Item No.	Arm installation/Adjustment	Item No.	Arm installation/Adjustment	Item No.
Slide on	MW029XX	Slide on	MW029XX	Slide on	MW029XX
Clip on	MW029XX	Clip on	MW029XX	Clip on	MW029XX
Clip on with cam adjust	MW029XX	Clip on with cam adjust	MW029XX	Clip on with cam adjust	MW029XX
Fixed plate	MW029XX	Fixed plate	MW029XX	Fixed plate	MW029XX

FINCAN IÇIN DELME

cup 1

cup 2

cup 3

BARDAK KURULUMU

		Screw on
		Wood screws	S
		Euro screws	L07
		Expanding
		Ø 8mm expansive dowel	E08
		Ø 10mm expansive dowel	E10
		Knock-in
		Ø 8mm dowel	D08
		Ø 10mm dowel	D10

OVERLAY TABLOSU

overlay table3

MINIMUM REVEAL TABLE

MINIMUM REVEAL TABLE3

MENTEŞE AYARI

	Depth Adjustment
	Rotate depth screw to adjust door gap. Adjust range : 4.8mm(cam screw)5mm(depth screw)
	Overlay Adjustment
	Rotate lateral screw to increase or decrease door overlay. Adjust range : 6mm
	Height Adjustment
	Linear mounting plate height adjust range 4mm
Notice: The reference adjustment range is the product design range, the actual size of the cabinet and the drilling method may have a certain impact on the parameters.