How To Install A Soft Close Hinge

Installing a soft close hinge is an important task that requires time and patience. While the process may seem daunting, it can be made simple with proper preparation. This article will provide step-by-step instructions for completing this task successfully. It will also discuss some of the common issues that arise during installation and how to address them. By utilizing the information provided here, one can ensure their hinges are installed properly and securely.

The first step in installing a soft close hinge (Knowledge: What Is A Self Closing Cabinet Hinge) is to measure correctly for accurate placement. Before beginning, take measurements from both sides of the door frame so that all necessary holes line up perfectly. Once these have been taken, mark each position clearly on the door frame before proceeding any further. Additionally, check if any adjustments need to be made to allow for clearance between the door itself and its surrounding area when opened or closed.

Next, use specialized tools such as drill bits and chisels to create holes at marked positions on the doorframe. Depending on what type of material is being used (wood or metal), different types of drills should be employed appropriately; always remember to wear safety equipment while working with power tools. Afterward, attach screws through pre-drilled holes into corresponding screwholes located within the actual hinge plates themselves until they are firmly secured in place against the door frame surface. Finally, test out your newly installed hinges by opening and closing multiple times to verify everything works accordingly.

Tools And Materials Required

Installing a soft close hinge (Learn: Best Soft Close Cabinet Hinges in 2023) requires a few basic tools and materials. For example, to install the hinge on a cabinet door, one will need at least two screws of the appropriate length for attaching the hinge, as well as a drill bit that is compatible with both the screw size and material of the door. Additionally, it is necessary to have either a standard screwdriver or an electric drill or driver to secure the screws in place. Furthermore, depending upon the type of door being used, additional hardware such as hinges may also be required. With these tools and materials gathered together, one can move forward with preparing the door for installation.

Preparing The Door

Before the soft close hinge can be installed, one must prepare the door accordingly. Door preparation is a necessary step in order to ensure that the hinge will properly fit and function as intended. This section will discuss how to adequately prep a door for installation of a soft close hinge:

  • Begin by removing any existing hinges from the door with an appropriate removal tool such as a screwdriver or drill bit.
  • Measure the distance between each hole on both sides of the door frame. This measurement should match up with the length of your selected hinge.
  • Sand down any rough edges surrounding holes on either side of the frame where hinges will be inserted; this ensures smooth installation without damaging hardware components.
  • Drill pilot holes into each side of the door frame if needed, using caution not to go too deep which could compromise structural integrity.
  • Utilize wood glue or epoxy around the drilled pilot holes for extra reinforcement and stability prior to mounting hardware components.

With these steps completed, you are now ready to move onto mounting the hinge onto your prepared doorset.

16 1

Mounting The Hinge

Having taken the necessary preparatory steps, it is now time to move on to mounting the hinge. With all of the door preparation correctly completed, one can begin this next step with alacrity. All that is needed for proper hinge installation is the hardware kit supplied by the manufacturer and a Phillips head screwdriver. The hinges should be mounted securely onto the frame first before being attached to the door itself; once both are in place they should line up perfectly. To ensure that each hinge adheres properly, take care when tightening screws and avoid over-tightening them. Additionally, if your chosen model has soft close adjustment settings make sure these are adjusted accordingly prior to completing installation. This will provide a safe closing motion as well as preventing damage from slamming doors or drawers. In this manner, you have ensured maximum efficiency for your new soft close hinge installation. Now that everything is firmly in place, we shall proceed to adjusting the hinge for optimum performance (Knowledge: How To Adjust A Spring Hinge).

Adjusting The Hinge

After the soft close hinges have been fitted, they must be adjusted to ensure the door opens and closes correctly. This can be done by adjusting both sides of the hinge. It is important that a slight resistance is felt when opening and closing the door as this ensures it will stay in place once closed.

The final step before finishing up is to check that any gap between the two doors has been properly filled with weatherstripping so no air leaks occur. Additionally, make sure latch strike plate lines up correctly with its corresponding hole on edge of door frame. Once all these steps have been completed, it’s time to test out your new soft close hinges!

Finishing Up

The final step in installing soft close hinges is the finishing touch. The door must be properly aligned, adjusted and lubricated to ensure it operates smoothly with the newly installed hinge hardware. To complete these tasks, first examine the door for any alignment issues that may have occurred during installation of the new hinge. Adjusting a soft close hinge (Learn: How To Adjust A Soft Close Hinge) requires patience as each adjustment needs to be tweaked several times until it fits perfectly. Lubricating the joint ensures smooth operation and extends its life span, so use a quality oil or grease recommended by the manufacturer.

Once all adjustments are made, check once more to make sure there are no further alignment issues before you place your tools away and admire your work. The process of installing a soft close hinge can seem intimidating at first but taking time to understand how this type of hardware works will help you achieve success when fitting them onto doors or cabinets in your home or office space. With practice and attention to detail, anyone can master hinge installation easily.


The installation of a soft close hinge is an important step in the building process. Many believe that this type of hinge(Learn: A Complete Guide to Choosing the Right Type of Cabinet Hinge) prevents wear and tear on doors, as closing them appears smoother and less forceful than with traditional hinges. To test this theory, one could compare the number of times a door needs to be replaced or repaired when using either type of hinge (Learn: Types Of Concealed Cabinet Hinges). Such research would provide valuable information regarding the benefits associated with installing a soft close hinge.

In conclusion, by following these steps one can easily install a soft close hinge (Related: How To Adjust A Self Closing Hinge). The benefit associated with such hinges remains somewhat unknown as there has yet to be any definitive proof as to their effectivity at preventing damage to doors. However, further investigation into this matter could reveal useful information which may make it easier for individuals deciding whether or not they should invest in this product. Ultimately, the decision lies with each individual based upon their own circumstances.

Table of Contents

Get a Free Quote

    Get a Free Quote

      Get Quotation Now

      Honestly, we’ll save your budget, enhance your quality,
      and fulfill your hardware quicker than ever.

        2150+ Brands and Furniture Company Find Their Best Hardware here:

        🔥 Wide range of hardware to cover all applications

        🔥 Free samples for furniture companies

        🔥 Flexible production solutions based on your needs

        🔥 High-end customization and packaging

        Wait, Time to Get Free Furniture Hardware Catalog!